4-command handheld transmitter

• option of querying door positions/reception status
• Noticeable quality of radio control system thanks to vibration when signal is successfully received
• Collision-resistant
• Available in various colours

Two white/stainless steel handsets supplied with each door, as standard. See below for other available handsets.

2-command handheld transmitter

• For up to two applications

4-command handheld transmitter

• High quality, modern design with stainless-steel trim
• slider function for protecting against unintentional actuation
• thanks to the compact design, can also be attached to a key ring
• Option of querying door positions/reception status
• Noticeable feedback of radio commands with vibration

12-command handheld transmitter

• Illuminated buttons
• Up to 10 different access codes and 2 uncoded buttons
• Also suitable as radio code buttons
• Weather-proof, well-suited for indoor and outdoor use
• Large buttons for easy operation 
  (even when wearing gloves)
• Long battery life
• Including aluminium wall holder and mounting material
• Radio receiver confirms received commands, an LED on the transmitter acknowledges receipt
• Commands are forwarded by SOMloq2-compatible receivers

5-command handheld transmitter

• For up to five applications

Open your gate with the touch of a finger

This fingerprint system opens garage doors and yard gates based on biometric identification at the touch of a finger. Radio receiver in power socket housing can be used to switch the connected application (e.g. lamp) on/off via radio control system.

Open your door with an individually programmable numeric code

The access control system with individually programmable numeric code. Doors can be opened without keys or access cards.

The access control system with individually programmable numeric code.

Doors can be opened conveniently via radio, without keys or access cards. Now also with the reliable and bidirectional radio control system SOMloq2.

Simple conversion of operators and control units with existing radio receiver

This bidirectional radio receiver module is suitable for the simple conversion of operators and control units with radio receiver # 7000VXXX to the SOMloq2 radio control system (twist 200 E/EL, twist 350, twist XL, RUNner, RUNner+, SP 900 and GIGA industrial gate control units).

• Optional feedback via handheld transmitter when the sent command has been processed by the receiver
• Antenna: integrated
• Memory: 40 radio commands can be programmed
• Slot for "Memo” memory extension (450 radio commands)
• Connection: 20-pin contact strip

Mode of operation

• Impulse mode (Jog): relay activated as long as radio signal is present
• Defined ON / OFF: command for defined switch-on and command for defined switch-off

Simple conversion of external operators and when changing the radio frequency

The bidirectional radio receiver allows simple conversion of external operators and easy changing of the radio frequency.

• Optional feedback via handheld transmitter when the sent command has been processed by the receiver
• Option of channel relay status query via transmitter (e.g. Pearl Status)
• Suitable for special applications (not suitable as tubular motor controller)
• Antenna: integrated
• Memory: 40 radio commands can be programmed
• Slot for "Memo” memory extension (450 radio commands)
• Connection: screw terminals
• Area of application: indoor and outdoor use
• Control output: 4 potential-free relay contacts (change-over, 8 A, AC 250 V)
• Pulse input: connection option for a potential-free pulse input

Mode of operation

• Impulse mode (Jog): relay activated as long as radio signal is present
• Defined ON / OFF: command for defined switch-on and command for defined switch-off
• switching mode (toggle): relay can be switched on/off via radio control system, like a surge relay (can only be set via SOMlink)
• Timed mode (Time): relay is triggered via radio signal and deactivated after set time (1– 255 s)

Simple conversion of external operators and when changing the radio frequency

The bidirectional radio receiver allows simple conversion of external operators and easy changing of the radio frequency.

• Optional feedback via handheld transmitter when the sent command has been processed by the receiver
• Antenna: integrated
• Memory: 40 radio commands can be programmed
• Slot for "Memo” memory extension (450 radio commands)
• Connection: 6-pin screw terminal
• Area of application: dry, closed rooms

Mode of operation

• Impulse mode (Jog): relay activated as long as radio signal is present
• Defined ON / OFF: command for defined switch-on and command for defined switch-off
• switching mode (toggle): relay can be switched on/off via radio control system, like a surge relay (can only be set via SOMlink)

Switch between various applications and devices via radio control system

The bi-directional radio receiver in the “SOMplug” power socket housing is well-suited for easy conversion and retrofitting of gate operators to the SOMloq2 radio control system.

• 112 memory locations
• Floating relay output via 1.5 m cable for connection to the pulse input of the operator
• Switching output max. 3 A, voltage 100–240 V, 50/60 Hz
• Power-saving (standby 0.45 W)
• Active forwarding of the radio signal by SOMloq2 receiver (hop function)
• Compatible with SOMlink

Switch between various applications and devices via radio control system

• Memory locations: 112
• Power-saving (standby 0.45 W)
• Manual switching of consumers possible via button on SOMsocket
• Active forwarding of the radio signal by SOMloq2 receiver (hop function)
• Status query by means of handheld transmitter (e.g. Pearl Status) to establish whether the connected consumer is switched on or off
• Compatible with SOMlink

3-command wall switch for base+ and pro+

The Wallstation for the garage door operators SOMMER base+ and SOMMER pro+ offers further functions. With the 3-command wall switch, you can open, stop and close the garage door, switch the operator lighting on and off or use the holiday function for added security in your home.

• 2-wire interior wall switch with three commands
• Button for opening, stopping and closing the garage door
• Button for switching the operator lighting on and off
• Button with which you can lock radio equipment, the external button and the ventilation function of the operator via Senso, keeps your home secure while you are absent or on holiday
• An illuminated button aids orientation in darkness
• LED for status display (locked/unlocked)
• The selection of the areas to be locked can be changed via the SOMlink service interface
• Simple connection via polarity-protected 2-wire bus

Note: The Wallstation is only supported by operators from 07/2017.

2-command radio wall button

• option of querying gate position/receiver status without travel motion thanks to small button
• feedback of radio commands with LED
• battery-operated - no additional installation effort is necessary